|
|
|
Wilmette T-Bar 9/16 Inch Connector 600MOTBAR9C
List Price: $15.00
Our Price: $11.70
You Save $3.30!
|
Wilmette Power Vault Adapter 600MOPVLT
List Price: $48.00
Our Price: $37.44
You Save $10.56!
|
|
|
|
To install a MonoRail system to a T-bar drop ceiling, add a T-bar connector
to every standoff (sold separately). The T-bar clip twists into the slat. (Use
only if local electrical codes allow).
Finish: Black or White.
0.50 lb./0.23 kg. ±
|
To install a MonoRail system to a vaulted ceiling, add a power vault adapter
to each power feed. Installs to the power feed (sold separately) and adjusts
to any angle to position rail parallel to the floor. When using a dual-feed
canopy or surface transformer order two.
Finish: Antique bronze, polished nickel or satin nickel.
0.10 lb./0.05 kg. ±
|
|
|
|
|
|
Wilmette End Power Feed 600MOPEND
List Price: $55.00
Our Price: $42.90
You Save $12.10!
|
Wilmette Direct-End Power Feed 600MOP4CD
List Price: $59.00
Our Price: $46.02
You Save $12.98!
|
|
|
|
End power feeds are generally used to bring power to a MonoRail system
when the transformer or canopy cannot be located directly above the run.
End power feed pushes into an end of the MonoRail and includes a
removable 4 inch round canopy and 12 feet field-cuttable softwire leads.
Finish: Antique bronze, polished nickel or satin nickel.
1.00 lb./0.45 kg. ±
|
End power feeds are generally used to bring power to a MonoRail system
when the transformer or canopy cannot be located directly above the run.
End power feed pushes into an end of the MonoRail and includes a
removable 4 inch round canopy and 12 feet field-cuttable softwire leads.
Finish: Antique bronze, polished nickel or satin nickel.
1.00 lb./0.45 kg. ±
|
|
|
|
|
|
Wilmette "T" Connector 600MOCTT
List Price: $70.00
Our Price: $54.60
You Save $15.40!
|
Wilmette Center Power Feed 600MOPCEN
List Price: $80.00
Our Price: $62.40
You Save $17.60!
|
|
|
|
The 3 inch by 1 inch “T” connector joins three pieces of MonoRail. It is conductive,
so you can power the system from any of the runs. The connector must be
supported with three rigid or adjustable standoffs (sold separately), one on
each end.
Finish: Antique bronze, polished nickel or satin nickel.
1.00 lb./0.45 kg. ±
|
Center power feeds are generally used to bring power to a MonoRail system
when the transformer or canopy cannot be located directly above the run.
The center power feed can be used anywhere within the run and includes
a removable 4 inch round canopy and 12 feet field-cuttable softwire leads. Specify
dual-feed when using a dual-feed transformer. Dual-feed canopy includes
isolating connectors.
Finish: Antique bronze, polished nickel or satin nickel.
2.15 lb./0.98 kg. ±
|
|
|
|
|
|
Wilmette Center Power Feed Dual 600MOPCEN4
List Price: $150.00
Our Price: $117.00
You Save $33.00!
|
|
|
Center power feeds are generally used to bring power to a MonoRail system
when the transformer or canopy cannot be located directly above the run.
The center power feed can be used anywhere within the run and includes
a removable 4 inch round canopy and 12 feet field-cuttable softwire leads. Specify
dual-feed when using a dual-feed transformer. Dual-feed canopy includes
isolating connectors.
Finish: Antique bronze, polished nickel or satin nickel.
2.15 lb./0.98 kg. ±
|
|
|
